Aaa Configuration Commands - 3Com S7906E Command Reference Manual

1

AAA Configuration Commands

AAA Configuration Commands
access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Default Level
2: System level
Parameters
disable: Specifies that the system does not limit the number of access users in the current ISP domain.
enable max-user-number: Specifies that the system limits the number of access users in the current
ISP domain. max-user-number is the maximum number of access users in the current ISP domain. The
valid range from 1 to 4094.
Description
Use the access-limit enable command to set the maximum number of access users allowed by an ISP
domain. After the number of user connections reaches the maximum number allowed, no more users
will be accepted.
Use the undo access-limit or access-limit disable command to remove the limitation.
By default, there is no limit to the amount of access users in an ISP domain.
As the access users may compete for network resources, setting a proper limit to the number of access
users helps provide a reliable system performance.
Examples
# Set a limit of 500 access users for ISP domain aabbcc.net.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] access-limit enable 500
accounting default
Syntax
accounting default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
1-1