ABB IRB 5720 Product Manual page 480

5 Repair
5.9.2 Replacing the axis-2 gearbox
Continued
5
6
Removing the axis-2 motor
1
2
Continues on next page
480
Action
Remove the cable bracket by removing the
screws.
Remove the motor cables.
Action
Before removing the motor, make sure that
the gearbox is completely drained.
DANGER
When releasing the holding brakes of the
motor, the lower arm will be movable and
may fall down if not secured. Verify that the
lower arm is secured as previously de-
scribed, before continuing.
© Copyright 2022 ABB. All rights reserved.
Note
xx2100000598
xx2100000599
Note
Product manual - IRB 5720
3HAC079195-001 Revision: A