Subaru IMPREZA GD 2007 Series Manual page 2362

asieps_tobira_IM_US.book 15 ページ ２０１２年１月１７日 火曜日 午後３時４８分
7. Turbocharger
A: REMOVAL
1. EXCEPT FOR STI MODEL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from the battery.
3) Remove the center exhaust pipe.
<Ref. to EX(H4DOTC)-10, REMOVAL, Center Ex-
haust Pipe.>
4) Lower the vehicle.
5) Separate the turbocharger joint pipe from turbo-
charger.
6) Disconnect the engine coolant hose which is
connected to coolant filler tank.
Turbocharger
7) Loosen the clamp which secures turbocharger to
intake duct.
8) Remove the bolts which secure oil inlet pipe
bracket to turbocharger.
9) Disconnect the engine coolant hose from the
pipe, and remove the turbocharger bracket RH.
FU-00009
10) Remove the oil inlet pipe from turbocharger.
IN-00019
(A) Oil inlet pipe
(B) Metal gasket
11) Disconnect the oil outlet hose from pipe.
IN-00174
12) Take out the turbocharger from engine com-
partment.
IN(H4DOTC)-15
INTAKE (INDUCTION)
(A)
(B)
(B)
(B)
IN-00074
IN-02201
IN-02185
IN-00024