Subaru IMPREZA GD 2007 Series Manual page 2366

asieps_tobira_IM_US.book 19 ページ ２０１２年１月１７日 火曜日 午後３時４８分
5) Attach the turbocharger joint pipe to turbocharg-
er.
NOTE:
Use a new gasket.
Tightening torque:
35 N·m (3.6 kgf-m, 25.8 ft-lb)
6) Connect the engine coolant hose which is con-
nected to the coolant filler tank.
7) Lift up the vehicle.
8) Install the center exhaust pipe. <Ref. to
EX(H4DOTC)-11, INSTALLATION, Center Ex-
haust Pipe.>
9) Lower the vehicle.
10) Connect the ground cable to the battery.
Turbocharger
IN-00019
IN-00020
FU-00009
IN(H4DOTC)-19
INTAKE (INDUCTION)