Procedure: Conditional Email Set-Up; Parameter Access Page - YASKAWA SI-EP3 Technical Manual

9 Web Interface
■

Procedure: Conditional Email Set-up

1.
Click the "Enable" check box to enable the alert.
2.
Define the condition that will trigger the email by selecting a monitor parameter, a comparator, and a
value.
Set the conditions to send alerts from the "Condition" drop-down selection. If choosing only one condition
and no OR or AND are needed, set the "OR/AND" drop-down selection to "—".
3.
Enter the email address where the alert will be sent.
4.
Enter the message that will appear in the email contents.
5.
Enter the email subject.
◆

Parameter Access Page

The Parameter Access page allows the user to read and write parameters from the drive. Write access is restricted
until a valid password is entered.
48
Figure 9.5 Email Alerts Page View
YASKAWA SIEP C730600 89E PROFINET Technical Manual