Siemens G130 List Manual page 588

2 Parameters
2.2 List of parameters
p3100 RTC time stamp mode / RTC t_stamp mode
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Unsigned16
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Sets the mode for the time stamp
Value: 0:
1:
2:
Notice: For p3100 = 1:
The system prevents this setting from being changed. The parameter can only be influenced after "Set factory
setting" or with a "Project download".
Note: RTC: Real-time clock
UTC: Universal Time Coordinates
For p3100 = 1:
Time of day synchronization is only possible with this setting.
The UTC time started, according to the definition on 01.01.1970 at 00:00:00 and is output in days and milliseconds.
p3101[0...1] Setting UTC time / Set UTC time
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Unsigned32
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Setting the UTC time.
This means that the drive system is synchronized to the time specified by the time master.
To start p3101[1] must be written to followed by p3101[0]. After writing to p3101[0], the UTC time is accepted.
Index: [0] = Milliseconds
[1] = Days
Dependency: Refer to: p3100
r3102[0...1] Displaying UTC time / Display UTC time
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned32
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
-
Description: Displaying the current UTC time.
Index: [0] = Milliseconds
[1] = Days
Dependency: Refer to: p3100
588
Operating hours
UTC format
Operating hours + 01.01.2000
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
2
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
4294967295
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
List Manual (LH2), 07/2016, A5E03263479A
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
2
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
SINAMICS G130/G150