Siemens G130 List Manual page 570

2 Parameters
2.2 List of parameters
p2247[0...n] Technology controller motorized potentiometer ramp-up time / Tec_ctr mop t_r-up
VECTOR_G Can be changed: U, T
(Tech_ctrl)
Data type: FloatingPoint32
P-Group: Technology
Not for motor type: -
Min
0.0 [s]
Description: Sets the ramp-up time for the internal ramp-function generator for the motorized potentiometer of the technology
controller.
Dependency: Refer to: p2248
Note: The time is referred to 100 %.
When the initial rounding-off is activated (p2230.2 = 1) the ramp-up is correspondingly extended.
p2248[0...n] Technology controller motorized potentiometer ramp-down time /
Tec_ctrMop t_rdown
VECTOR_G Can be changed: U, T
(Tech_ctrl)
Data type: FloatingPoint32
P-Group: Technology
Not for motor type: -
Min
0.0 [s]
Description: Sets the ramp-down time for the internal ramp-function generator for the motorized potentiometer of the technology
controller.
Dependency: Refer to: p2247
Note: The time is referred to 100 %.
When the initial rounding-off is activated (p2230.2 = 1) the ramp-down is correspondingly extended.
r2250 CO: Technology controller motorized potentiometer setpoint after RFG /
Tec_ctr mop aftRFG
VECTOR_G Can be changed: -
(Tech_ctrl)
Data type: FloatingPoint32
P-Group: Technology
Not for motor type: -
Min
- [%]
Description: Displays the effective setpoint after the internal ramp-function generator for the motorized potentiometer of the
technology controller.
Dependency: Refer to: r2245
p2252 Technology controller configuration / Tec_ctrl config
VECTOR_G Can be changed: U, T
(Tech_ctrl)
Data type: Unsigned16
P-Group: Modulation
Not for motor type: -
Min
-
Description: Sets the configuration of the technology controller.
Bit field: Bit
00
01
02
03
570
Signal name
Ramp-up/down time independent of
setpoint sign
Integrator independent of Kp
Output signal without ramp active
Act value limit
Calculated: -
Dyn. index: DDS, p0180
Unit group: -
Scaling: -
Max
1000.0 [s]
Calculated: -
Dyn. index: DDS, p0180
Unit group: -
Scaling: -
Max
1000.0 [s]
Calculated: -
Dyn. index: -
Unit group: 9_1
Scaling: PERCENT
Max
- [%]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
1 signal
Yes
Yes
Yes
Yes
List Manual (LH2), 07/2016, A5E03263479A
Access level: 2
Func. diagram: 7954
Unit selection: -
Expert list: 1
Factory setting
10.0 [s]
Access level: 2
Func. diagram: 7954
Unit selection: -
Expert list: 1
Factory setting
10.0 [s]
Access level: 2
Func. diagram: 7954
Unit selection: p0595
Expert list: 1
Factory setting
- [%]
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0111 bin
0 signal
No
No
No
No
SINAMICS G130/G150
FP
-
-
-
-