Siemens G130 List Manual page 887

r8952[0...3] CBE2x Default Gateway actual / CBE2x def GW act
CU_G130_PN (PN Can be changed: -
CBE20),
Data type: Unsigned8
CU_G150_PN (PN
P-Group: -
CBE20),
Not for motor type: -
CU_G130_DP (PN
CBE20),
Min
CU_G150_DP (PN
0
CBE20)
Description: Displays the actual standard gateway for the Communication Board Ethernet 20/25 (CBE20/CBE25).
r8953[0...3] CBE2x Subnet Mask actual / CBE2x Sub Mask act
CU_G130_PN (PN Can be changed: -
CBE20),
Data type: Unsigned8
CU_G150_PN (PN
P-Group: -
CBE20),
Not for motor type: -
CU_G130_DP (PN
CBE20),
Min
CU_G150_DP (PN
0
CBE20)
Description: Displays the actual subnet mask for the Communication Board Ethernet 20/25 (CBE20/CBE25).
r8954 CBE2x DHCP Mode actual / CBE2x DHCP act
CU_G130_PN (PN Can be changed: -
CBE20),
Data type: Integer16
CU_G150_PN (PN
P-Group: -
CBE20),
Not for motor type: -
CU_G130_DP (PN
CBE20),
Min
CU_G150_DP (PN
0
CBE20)
Description: Displays the actual DHCP mode for the Communication Board Ethernet 20/25 (CBE20/CBE25).
Value: 0:
2:
3:
Notice: When the DHCP mode is active (parameter value greater than 0), PROFINET communication via this interface is no
longer possible! However, the interface can be used by the STARTER/SCOUT commissioning tool.
r8955[0...5] CBE2x MAC address / CBE2x MAC Addr
CU_G130_PN (PN Can be changed: -
CBE20),
Data type: Unsigned8
CU_G150_PN (PN
P-Group: -
CBE20),
Not for motor type: -
CU_G130_DP (PN
CBE20),
Min
CU_G150_DP (PN
0000 hex
CBE20)
Description: Displays the MAC address for the Communication Board Ethernet 20/25 (CBE20/CBE25).
r8959 CBE2x DAP ID / CBE2x DAP ID
CU_G130_PN (PN Can be changed: -
CBE20),
Data type: Unsigned32
CU_G150_PN (PN
P-Group: -
CBE20),
Not for motor type: -
CU_G130_DP (PN
CBE20),
Min
CU_G150_DP (PN
0000 hex
CBE20)
Description: Displays the DAP ID for PROFINET via the Communication Board Ethernet 20/25 (CBE20/CBE25).
The combination of device ID (r8909) and DAP ID (r8959) uniquely identifies a PROFINET access point.
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
DHCP off
DHCP on, identification using MAC address
DHCP on, identification via name of station
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
255
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
255
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
3
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
00FF hex
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
FFFF FFFF hex
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
887