Siemens G130 List Manual page 749

p6996[0...63] Recorder signals / Rec sig
B_INF (Rec) Can be changed: U, T
Data type: Unsigned32
P-Group: Commands
Not for motor type: -
Min
0
Description: Setting to parameterize the signals for the recorder.
r6997 CO: Recorder sequencer state / Rec state
VECTOR_G (Rec), Can be changed: -
B_INF (Rec)
Data type: Integer16
P-Group: Closed-loop control
Not for motor type: -
Min
0
Description: Display and connector output of the state of the sequencer for the recorder.
Value: 0:
10:
20:
30:
40:
50:
60:
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
Not active
Active
Post trigger time running
Prepare data save operation
Start data save
End data save
Configuration
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
996553699
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
60
2 Parameters
2.2 List of parameters
Access level: 4
Func. diagram: 8144
Unit selection: -
Expert list: 1
Factory setting
[0] 3600
[1] 3700
[2] 3701
[3] 3703
[4] 3711
[5] 3712
[6] 6600
[7] 6800
[8] 7000
[9] 8200
[10] 9400
[11] 89800
[12] 89900
[13] 7200
[14] 183800
[15] 183900
[16] 723000
[17] 723001
[18] 703100
[19...63] 0
Access level: 4
Func. diagram: 8145
Unit selection: -
Expert list: 1
Factory setting
-
749