Siemens G130 List Manual page 784

2 Parameters
2.2 List of parameters
11826: ENC_ID_RES_PHASE_SHIFT
12088: ENC_ID_SM_DIFF_PULSE_ACCU
15150: ENC_ID_SPINDLE_S1_RAW
15151: ENC_ID_SPINDLE_S4_RAW
15152: ENC_ID_SPINDLE_S5_RAW
15155: ENC_ID_SPINDLE_S1_CAL
15156: ENC_ID_SPINDLE_S4_CAL
15157: ENC_ID_SPINDLE_S5_CAL
r7832[0...23] Telegram diagnostics numerical format / Telegr diag format
VECTOR_G, ENC Can be changed: -
Data type: Integer16
P-Group: -
Not for motor type: -
Min
-1
Description: Displays the original numerical format of the signals contained in the telegram.
The associated signal number is represented in the appropriate index of r7831.
Value: -1:
0:
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
Dependency: Refer to: r7831
r7833[0...23] Telegram diagnostics unsigned / Telegr diag unsign
VECTOR_G, ENC Can be changed: -
Data type: Unsigned32
P-Group: -
Not for motor type: -
Min
-
Description: Parameter to display a DSA signal in the unsigned-integer format.
The associated signal number is represented at the appropriate index in r7831.
r7834[0...23] Telegram diagnostics signed / Telegr diag sign
VECTOR_G, ENC Can be changed: -
Data type: Integer32
P-Group: -
Not for motor type: -
Min
-
Description: Parameter to display a DSA signal in the signed-integer format.
The associated signal number is represented at the appropriate index in r7831.
784
Unknown
Boolean
Signed 1 byte
Signed 2 byte
Signed 4 byte
Signed 8 byte
Unsigned 1 byte
Unsigned 2 byte
Unsigned 4 byte
Unsigned 8 byte
Float 4 byte
Double 8 byte
mm dd yy HH MM SS MS DOW
ASCII string
SINUMERIK frame type
SINUMERIK axis type
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
14
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
List Manual (LH2), 07/2016, A5E03263479A
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
SINAMICS G130/G150