Siemens G130 List Manual page 93

r0127[0...n] Power unit EEPROM data version / PU EEPROM version
VECTOR_G, B_INF Can be changed: -
Data type: Unsigned32
P-Group: Converter
Not for motor type: -
Min
-
Description: Displays the version of the EEPROM data of the power unit.
Dependency: Refer to: r0147, r0157
Note: For parallel circuit configurations, the parameter index is assigned to a power unit.
r0128[0...n] Power unit firmware version / PU FW version
VECTOR_G, B_INF Can be changed: -
Data type: Unsigned32
P-Group: Converter
Not for motor type: -
Min
-
Description: Displays the firmware version of the power unit.
Dependency: Refer to: r0018, r0148, r0158, r0197, r0198
Note: Example:
The value 1010100 should be interpreted as V01.01.01.00.
For parallel circuit configurations, the parameter index is assigned to a power unit.
p0130 Number of Motor Data Sets (MDS) / MDS count
VECTOR_G Can be changed: C1(3)
Data type: Unsigned8
P-Group: Data sets
Not for motor type: -
Min
1
Description: Sets the number of Motor Data Sets (MDS).
p0131[0...n] Motor component number / Mot comp_no
VECTOR_G Can be changed: C1(4)
Data type: Unsigned8
P-Group: Data sets
Not for motor type: -
Min
0
Description: The motor data set is assigned to a motor using this parameter.
This unique component number is assigned when parameterizing the topology.
Only component numbers can be entered into this parameter that correspond to a motor.
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
Calculated: -
Dyn. index: PDS, p0120
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: PDS, p0120
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
16
Calculated: -
Dyn. index: MDS, p0130
Unit group: -
Scaling: -
Max
199
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 2
Func. diagram: 8575
Unit selection: -
Expert list: 1
Factory setting
1
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
93