Siemens G130 List Manual page 779

Value: 0:
1:
Dependency: Refer to: p7790, p7791
Notice: Trace files of this component already available on the non-volatile storage medium are overwritten after backup has
been activated.
p7820 DRIVE-CLiQ component component number / DQ compo_no
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Unsigned16
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Sets the component number of the DRIVE-CLiQ component whose parameters are to be accessed.
Dependency: Refer to: p7821, p7822, r7823
p7821 DRIVE-CLiQ component parameter number / DQ para_no
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Unsigned16
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Sets the parameter number to access a parameter of a DRIVE-CLiQ component.
Dependency: Refer to: p7820, p7822, r7823
p7822[0...1] DRIVE-CLiQ component parameter index / number of indices / DQ para_idx
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Unsigned16
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Index [0] Sets the parameter index to access a parameter of a DRIVE-CLiQ component.
Index [1] Number of indices that should be written to.
Write:
If several indices must be written to, then beforehand p7837 must be written to, followed by p7822[1]. p7822 is used
to secure the consistent display of data to be written to p7837.
Dependency: Refer to: p7820, p7821, r7823
r7823[0...254] DRIVE-CLiQ component read parameter value / Read DQ value
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned32
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
-
Description: Displays the parameter value read from the DRIVE-CLiQ component.
Dependency: Refer to: p7820, p7821, p7822
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
Inactive
Upload and save active
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
65535
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
65535
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
65535
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
[0] 0
[1] 1
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
779