Siemens G130 List Manual page 481

r1926[0...2] Identified effective valve lockout time / t_lock_valve id
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: -
Min
- [µs]
Description: Displays the identified effective valve lockout time.
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
r1927[0...2] Identified rotor resistance / R_rotor ident
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: -
Min
- [ohm]
Description: Displays identified rotor resistance (on separately excited synchronous motors: damping resistance).
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
r1929[0...2] Identified cable resistance / R_cable ident
VECTOR_G Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: -
Min
- [ohm]
Description: Displays the identified cable resistance.
Index: [0] = Phase U
[1] = Phase V
[2] = Phase W
r1934[0...9] q inductance identified / Lq ident
VECTOR_G (n/M) Can be changed: -
Data type: FloatingPoint32
P-Group: Motor identification
Not for motor type: -
Min
- [mH]
Description: Displays the identified (differential) q-inductance.
Dependency: Refer to: r1935, p1959, p1960
Note: The Lq characteristic consists of the value pairs from p1934 and p1935 with the same index.
This value corresponds to the value of the total leakage inductance (r0377).
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
- [µs]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
- [ohm]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
- [ohm]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
- [mH]
2 Parameters
2.2 List of parameters
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [µs]
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [ohm]
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [ohm]
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
- [mH]
481