Show Frame-Relay Multilink Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show frame-relay multilink <interface> detailed
Use the show frame-relay multilink command to display information associated with the Frame Relay
multilink interface.
Syntax Description
<interface>
detailed
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 9.1
Usage Examples
The following is a sample output from this command:
>enable
#show frame-relay multilink
Bundle: frame-relay 1 is DOWN; class A bundle
Near-end BID: MFR1; Far-end BID: unknown
61200990L1-35E
Optional. Specifies the display of information for a specific interface. Enter the
show frame-relay multilink ? command for a complete list of interfaces.
Optional. Displays more detailed information.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
181