Debug Ip Pim-Sparse Assert Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug ip pim-sparse assert [event | state] <address>
Use the debug ip pim-sparse assert command to display debug messages associated with
protocol-independent multicast (PIM) sparse assert transactions. Debug messages are displayed (real time)
to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.
Syntax Description
event
state
<address>
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following example activates all PIM sparse assert event messages:
>enable
#debug ip pim-sparse assert event
61200990L1-35E
Displays PIM sparse assert events.
Displays PIM sparse assert state changes.
Specifies group address to filter.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
117