Debug Ip Rip Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug ip rip [events]
Use the debug ip rip command to activate debug messages associated with Routing Information Protocol
(RIP) operation in the AOS. Debug messages are displayed (real time) to the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Syntax Description
events
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1
Functional Notes
The debug ip rip command activates debug messages to provide information on RIP activity in the AOS.
RIP allows hosts and routers on a network to exchange information about routes.
Usage Examples
The following example activates debug messages associated with RIP activity:
>enable
#debug ip rip
61200990L1-35E
Optional. Displays only RIP protocol events.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
123