Debug Ip Ospf Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug ip ospf
Use the debug ip ospf command to activate debug messages associated with open shortest path first
(OSPF) routing operations. Debug messages are displayed (real time) to the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Syntax Description
adj
database-timer
events
flood
hello
lsa-generation
packet
retransmission
spf
tree
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
61200990L1-35E
Displays OSPF adjacency events.
Displays OSPF database timer.
Displays OSPF events.
Displays OSPF flooding.
Displays OSPF hello events.
Displays OSPF link state advertisement (LSA) generation.
Displays OSPF packets.
Displays OSPF retransmission events.
Displays OSPF shortest-path-first (SPF) calculations.
Displays OSPF database tree.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
114