Debug Hdlc Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug hdlc [errors | verbose]
Use the debug hdlc command to activate debug messages associated with the high-level data link control
(HDLC) interface. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Syntax Description
errors
verbose
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 9.1
Usage Examples
The following example activates detailed debug messages associated with the HDLC interface:
>enable
#debug hdlc verbose
61200990L1-35E
Enables protocol error and statistic messages.
Enables detailed debug messages.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
103