Show Dynamic-Dns Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show dynamic-dns
Use the show dynamic-dns command to show information related to the dynamic domain naming system
(DNS) configuration.
Syntax Description
No subcommands.
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1
Usage Examples
The following is sample output from this command:
>enable
#show dynamic-dns
eth 0/1:
Hostname: host
Is Updated: no
Last Registered IP: 10.15.221.33
Last Update Time: 00:00:00 UTC Thu Jan 01 1970
61200990L1-35E
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
174