Debug Tftp Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug tftp [client | server] packets
Use the debug tftp packets command to activate debug messages associated with Trivial File Transfer
Protocol (TFTP) packets. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable the debug messages.
Syntax Description
client
server
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 11.1
Usage Examples
The following example activates debug messages associated TFTP server packets:
>enable
#debug tftp server packets
61200990L1-35E
Activates TFTP client packet debug messages.
Activates TFTP server packet debug messages.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
140