Debug Ip Policy Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
debug ip policy
Use the debug ip policy command to display policy-based routing events. Debug messages are displayed
(real time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example activates policy-based routing event messages:
>enable
#debug ip policy
61200990L1-35E Copyright © 2005 ADTRAN 122