Debug Ip Pim-Sparse Hello Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
debug ip pim-sparse hello
Use the debug ip pim-sparse hello command to display protocol-independent multicast (PIM) sparse
mode hello transactions. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use
the no form of this command to disable debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example activates PIM sparse mode hello messages:
>enable
#debug ip pim-sparse hello
61200990L1-35E Copyright © 2005 ADTRAN 118