Show Demand Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show demand
Use the show demand command to display information regarding demand routing parameters and
statistics.
Variations of this command include the following:
show demand
show demand interface
show demand interface <interface>
show demand resource pool
show demand resource pool <resource pool name>
show demand sessions
Syntax Description
interface
interface <interface>
resource pool
resource pool <resource pool name> Displays resource pool information for a specific resource pool
sessions
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 11.1
Usage Examples
The following is example output from the show demand interface command:
>enable
#show demand int 1
Demand 1 is UP (connected)
Configuration:
61200990L1-35E
Displays the information for all demand routing interfaces.
Displays information for a specific demand routing interface. Valid
range: 1 to 1024. Type show demand interface ? for a list of valid
interfaces.
Displays all resource pool information.
name.
Displays active demand sessions.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
169