Show Crypto Ipsec Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show crypto ipsec
Use the show crypto ipsec command to display information regarding the IPSec configuration.
Variations of this command include the following:
show crypto ipsec sa
show crypto ipsec sa address <ip address>
show crypto ipsec sa map <mapname>
show crypto ipsec transform-set
show crypto ipsec transform-set <transform-set name>
Syntax Description
sa
sa address <ip address>Displays all IPSec security associations associated with the designated peer IP
sa map <mapname>
transform-set
<transform-set name>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 4.1
61200990L1-35E
Displays all IPSec security associations.
address.
Displays all IPSec security associations associated with the designated crypto
map name.
Displays all defined transform sets.
Displays information for a specific transform set.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
166