Show Configuration Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
show configuration
Use the show configuration command to display a text printout of the startup configuration file stored in
nonvolatile random access memory (NVRAM).
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following is a sample output of the show configuration command:
>enable
#show configuration
!
!
no enable password
!
ip subnet-zero
ip classless
ip routing
!
event-history on
no logging forwarding
logging forwarding priority-level info
no logging email
!
ip policy-timeout tcp all-ports 600
ip policy-timeout udp all-ports 60
ip policy-timeout icmp 60
!
61200990L1-35E Copyright © 2005 ADTRAN 160