Show Fan-Tach Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show fan-tach
Use the show fan-tach command to view the unit's current fan speed.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 5000 Series.
Command History
Release 6.1
Usage Examples
The following example shows the current fan speed:
>enable
#show fan-tach
Fan Tach (in rpm) Current
Processor 8160
Chassis 1 3060
Chassis 2 3120
61200990L1-35E
Command was introduced.
Min
8100
3060
3060
Copyright © 2005 ADTRAN
Enable Mode Command Set
Max Avg
17804 8544
31380 4237
31560 4277
176