Debug Tacacs + Packets Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
debug tacacs+ packets
Use the debug tacas+ packets command to activate debug messages associated with terminal access
controller access control system (TACACS+) protocol. Debug messages are displayed (real time) to the
terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example activates debug messages associated with the TACACS+ protocol:
>enable
#debug tacacs+ packets
61200990L1-35E Copyright © 2005 ADTRAN 139