Show Access-Lists Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show access-lists <listname>
Use the show access-lists command to display all configured access lists in the system (or a specific list).
Syntax Description
<listname>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 2.1
Functional Notes
The show access-lists command displays all configured access lists in the system. All entries in the
access list are displayed, and a counter indicating the number of packets matching the entry is listed.
Usage Examples
The following is a sample output from the show access-lists command:
>enable
#show access-lists
Standard access list MatchAll
permit host 10.3.50.6 (0 matches)
permit 10.200.5.0 wildcard bits 0.0.0.255 (0 matches)
extended access list UnTrusted
deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches)
deny tcp any (0 matches)
61200990L1-35E
Optional. Specifies a particular access list to display.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
152