Show Bridge Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show bridge <interface> <slot/port> <bridge group #>
Use the show bridge command to display a list of all configured bridge groups (including individual
members of each group). Enter an interface or a bridge number to display the corresponding list.
Syntax Description
<interface> <slot/port> Optional. Displays all bridge groups associated with the specific interface. Type the
<bridgegroup#>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 1.1
Release 9.1
Usage Examples
The following is a sample output from the show bridge command:
>enable
#show bridge
Total of 300 station blocks 295 free
Address
00:04:51:57:4D:5A
00:04:5A:57:4F:2A
00:10:A4:B3:A2:72
00:A0:C8:00:8F:98
00:E0:81:10:FF:CE
61200990L1-35E
show bridge ? command to display a list of applicable interfaces.
Optional. Displays a specific bridge group
Command was introduced.
Command was expanded to include HDLC interface.
Action Interface
forward eth 0/1
forward eth 0/1
forward eth 0/1
forward eth 0/1
forward fr 1.17
Copyright © 2005 ADTRAN
Enable Mode Command Set
Age Rx Count
0 7133392
0 402365
4 2
0 412367
0 1502106
Tx Count
7042770
311642
0
231
1486963
155