Show Debugging Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
show debugging
Use the show debugging command to display a list of all activated debug message categories.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following is a sample output from the show debugging command:
>enable
#show debugging
debug access-list MatchAll
debug firewall
debug ip rip
debug frame-relay events
debug frame-relay llc2
debug frame-relay lmi
61200990L1-35E Copyright © 2005 ADTRAN 168