Dir Flash Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dir [<input> | flash | flash <input>]
Use the dir flash command to list all of the files stored in flash.
Syntax Description
<input>
flash
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 10.1
Usage Examples
The following is example lists all files stored in flash:
>enable
#dir flash
61200990L1-35E
Lists all files stored in flash that match the specified pattern.
Lists all files stored in flash.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
142