Debug Sip Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
debug sip [cldu | location | manager | registrar <extension> |
registration <extension>]
Use the debug sip command to activate debug messages associated with Session Initiation Protocol (SIP)
events. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Syntax Description
location
manager
proxy
<subsource>
registrar
<extension>
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 Series units.
Command History
Release 9.3
Usage Examples
The following example activates all debug messages associated with SIP stack manager events:
>enable
#debug sip stack manager
61200990L1-35E
Activates SIP location database event debug messages.
Activates SIP stack manager event debug messages.
Activates SIP stack proxy event debug messages.
Specifies a specific subsource.
Activates SIP registrar event debug messages.
Specifies a specific extension.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
134