Display Errors - Avaya S8700 Maintenance Manual

Maintenance Commands
Output

display errors

The following options control which errors will be displayed.
ERROR TYPES
Error Type:
REPORT PERIOD
Interval:
EQUIPMENT TYPE ( Choose only one, if any, of the following )
Trunk ( group/member ):
Field Descriptions
Port
MaintenanceNam
e
Alt Name
Error Type
Aux Data
First Occur
7-114 Issue 1 May 2002
ERROR REPORT
____ Error List:
_ From: __/__/__:__ To:
Cabinet: __
Port Network: __
Board Number: ____
Port: ______
Category: ________
Extension: _____
__/__
The physical location of the alarmed object. For circuit pack based MOs,
the location is cabinet-carrier-[slot]-[circuit]. For PN-based objects, such as
TDM-BUS, the location displays as
For Fiber Link-based objects, the location displays as
x is the Fiber Link number and a- or b-pnc indicates one of the PNC pair.
(Always a-pnc for a high-reliability system, with an unduplicated PNC.)
The abbreviated name of the MO that encountered the error.
An alternate means of identifying the MO.
Numerical error code that identifies the type of problem. The meanings of
these codes are explained under the name of the MO in Chapter 8.
Additional numerical information about the error type. Only the most recent
auxiliary data for each error type is displayed.
Month, day, hour, and minute (and second, if the high-resolution
command-line option is used) that the error was first recorded.
Page 1 of 1
active-alarms
__/__/__:__
, where xx is the PN number.
3PN xx
x a,b-PNC
555-233-143
where