Avaya S8700 Maintenance Manual page 447

list measurements ds1
Field Descriptions
The following field descriptions pertain to the summary reports accessed by list
measurements ds1 and list measurements ds1-facility summary .
Counted Since:
Number of
Seconds Elapsed
Into Current
15-min
Interval:
Total of Valid
15-min
Intervals in
Past 24-hr
Period:
Category
Errored Seconds
Bursty Err Secs
Severely Err
Secs
Failed Seconds
Worst 15-Min
Interval
Total of 24-Hour
Counts
Current
15-Minute
Interval
555-233-143
The start time and date when the associated measurement counters
were cleared, or when the DS1C circuit pack or facility was administered.
The number of seconds from the beginning of the current 15-minute
interval. This field has a value from 0 to 900.
The total number of 15-minute intervals in the past 24-hour period that
contain valid data. This field has a value from 0 to 96.
The following four fields report data form the error counters.
The value of the errored seconds counter for the specified 15-minute
interval. This field has a value from 0 to 900 or N/A if the data for the
15-minute interval is invalid.
The value of the bursty errored seconds counter for the specified
15-minute interval. This field has a value from 0 to 900 or N/A if the data
for the 15-minute interval is invalid.
The value of the severely errored seconds counter for the specified
15-minute interval. This field has a value from 0 to 900 or N/A if the data
for the 15-minute interval is invalid.
The value of the failed seconds counter for the specified 15-minute
interval. This field has a value from 0 to 900 or N/A if the data for the
15-minute interval is invalid.
The date (Date), end time (Time), and error count (Count; from 0 to 900
in increments of four) of the 15-minute interval in the previous 24-hour
period that contains the maximum value for each of the four error
categories (errored seconds, bursty errored seconds, severely errored
seconds, and failed seconds).
The sum of every valid 15-minute count for the previous 24-hour period
for each of the four error categories. This field has a value from 0 to
65535.
The error count for the current (incomplete) 15-minute interval for each of
the four error categories. This field has a value from 0 to 899 or N/A if the
data for the current 15-minute interval is invalid.
Issue 1 May 2002 7-191