Avaya S8700 Maintenance Manual page 376

Maintenance Commands
Table 7-16 lists the event type, the text that appears in the Event Description
field, a further explanation of the condition, and the type of data in the Event 1
and Event 2 fields.
Table 7-16. Denied IP events
Event
Type Event Description
1907 IP RRJ-Invalid RAS
addr
1908 IP RRJ-Invld call
SigAddr
1909 IP RRJ-RemoteOfc
misadmin
1910 IP RRJ-H323
UserObj undef
1911 IP RRJ-Exceed max
endpts
1912 IP RRJ-Exceed
ProdID/Ver
7-120 Issue 1 May 2002
Explanation
Registration Rejected because the
RAS address in the RRQ is
invalid.
IP Registration Rejection because
signaling address in the RRQ is
invalid.
Registration rejected because:
1. Remote Office is enabled on
the Signaling Group screen,
but the RRQ is not from a
supported Remote Office
product.
2. The RRQ is from a supported
Remote Office product, but
Remote Office not enabled on
the Signaling Group screen.
3. Remote Office is enabled on
the Signaling Group screen,
but the Terminal Type in the
RRQ is not valid.
Registration rejected because
there is no H323 User Object.
Registration rejected because the
capacity for either registered
endpoints or Remote Office
endpoints is exceeded. Check
maximum allowed in the system
on page 1 of the System
Parameters Customer Options
screen.
Registration rejected because the
maximum number of registered
endpoints of a specific product ID
and version is exceeded. Check
the limit on the System
Parameters Customer Options
screen.
Event Event
Data 1 Data 2
0 IP address
that sent the
RRQ
0 IP address
0 IP address
0 IP address
0 1st part: #
of RO
stations;
2nd part: #
of IP
stations,
respectively
T/S: IP 1st part:
Product registered
from the limit; 2nd
System part: actual
Parameters count,
Customer respectively
Options
screen
Continued on next page
555-233-143