Display Node-Names - Avaya S8700 Maintenance Manual

display node-names

display node-names
This command displays a list of the administered node names.
Table 7-17. display node-names command parameters
Action/ Object Qualifier
display print
node-names schedule
Output
The following example shows the output from the display node-names
command.
Page 1
Audix Name
1. _______
2. _______
3. _______
4. _______
5. _______
6. _______
7. _______
8. _______
Field Descriptions (Page 1)
Identifies the name of the adjunct or switch node. Enter 1-7 characters for
Audix Name
audix or msa; 1-20 characters for others. Default is blank.
IP address for the adjunct or switch. Enter 0 – 255 or leave blank
IP Address
(default).
MSA node name (up to 7 characters)
MSA Names
IP address for the adjunct or switch. Enter 0 – 255 or leave blank
IP Address
(default).
555-233-143
Qualifier Description
Example:
display node-names
NODE NAMES
IP address MSA Names
___.___.___.___ 1.
___.___.___.___ 2.
___.___.___.___ 3.
___.___.___.___ 4.
___.___.___.___ 5.
___.___.___.___ 6.
___.___.___.___ 7.
___.___.___.___
Permissions
init
inads
craft
IP Address
_______ ___.___.___.___
_______ ___.___.___.___
_______ ___.___.___.___
_______ ___.___.___.___
_______ ___.___.___.___
_______ ___.___.___.___
_______ ___.___.___.___
Issue 1 May 2002
Feature
Defaults Interactions
none none
page 1 of 6
7-139