Avaya S8700 Maintenance Manual page 371

display errors
Seq Cnt
Last Occur
Err Cnt
Err Rt
Rt/Hr
Al St
Ac
555-233-143
Sequence Count. These numbers give the order in which the errors were
logged. Each sequence covers a period of one second. Sequence
numbers are assigned to the first and last occurrences of a given error
within the one second period given in the time stamp. There may be gaps
in the sequence numbers within a given second because the last
occurrence of an error may replace an existing entry and because
sequence numbers are also assigned to software events not shown in the
hardware error log. This information is displayed only if the high-resolution
option is specified on the command line.
The month, day, hour, and minute (and second, if the high-resolution
command-line option is used) of the most recent error. If the system is
unable to retrieve the time of day when the error occurred, a "dummy" date
will be stamped in the log so as to distinguish it from reliable data. It
appears as "00/00/01:07"
The total number of times that the error type has occurred. The maximum
entry displayed is 999.
Average hourly rate at which the error has occurred from the first
occurrence to the present. The maximum entry displayed is 999.
An approximation of the rate at which this error occurred in the last hour.
The maximum entry displayed is 999.
Alarm Status – A character indicating the status of this MO in the error and
alarm logs. The allowed values are:

a Active alarm entry

r Resolved alarm entry

c Resolved alarm entry as a result of the long "clear" option of the
test command.

s Resolved alarm entry as a result of a software requested
(non-demand) system restart.

t Resolved alarm entry as a result of a technician requested system
restart.

n Not alarmed.
A flag (yes or no) indicating whether or not the maintenance object is still
under active consideration by the maintenance subsystem.
Issue 1 May 2002 7-115