Avaya S8700 Maintenance Manual page 454

Maintenance Commands
These measurements are displayed by software; the report output may span
multiple IP Media Processor or Medpro boards. A single report output combines
statistics from both IP Media Processor and Medpro boards. Codecs are
considered as part of a common pool.
Output
The following example shows the dsp-resource Hourly Output For Region 4.
list measurements ip dsp-resource hourly 4
Switch Name:
Meas DSP
Hour Region Rscs
0400 4 xxxx
0300 4 xxxx
0200 4 xxxx
0100 4 xxxx
0000 4 xxxx
2300 4 xxxx
2200 4 xxxx
2100 4 xxxx
2000 4 xxxx
Field Descriptions
Meas Hour
Region
DSP Rscs
7-198 Issue 1 May 2002
IP DSP RESOURCE HOURLY REPORT
DSP Usage In Reg
(Erl) Peg
xxxx.x xxxxx
xxxx.x xxxxx
xxxx.x xxxxx
xxxx.x xxxxx
xxxx.x xxxxx
xxxx.x xxxxx
xxxx.x xxxxx
xxxx.x xxxxx
xxxx.x xxxxx
The hour the measurement was taken. Switches in multiple time zones are
treated as in the current MMI reports. We do not assume that the customer
has made any correlation between LAN regions and time zones. Range:
0000 – 2300.
The network region that the IP Media Processors and Medpros for this
measurement are in. (The increase to 44 regions is required by [75101-2].)
Range: 1–44.
Total IP codec resources (voice channels) in the region. (22 or 31) * #
Medpro + 64 * #IP Media Processors. The 22 or 31 multiplier for Medpro
depends on admin of codec preferences. For R10, a G711 call takes 1
resource, while a G723/729 call or a Fax relay call takes 2 resources.
Range: 0–9999.
Date: 5:32 pm WED MAR 26, 2002
Out of Denied %
Reg Peg Peg Blk
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
xxxxx xxxxx xx.xx
% Out
of Srv
xx.xx
xx.xx
xx.xx
xx.xx
xx.xx
xx.xx
xx.xx
xx.xx
xx.xx
555-233-143