Get Boot-Image - Avaya S8700 Maintenance Manual

Maintenance Commands

get boot-image

Use this command to view the two firmware image parameters on the TN2501AP
circuit pack.
Table 7-19. display firmware-image command parameters
Action/Object Qualifier
get boot- location
image
Output
get boot-image 1C07
Image 1
Board Type: TN2501
FW Vintage: 02
HW Signature: 02
Suffix: A
Date: 03/02/02
Timestamp: 10:30:50
CRC Checksum: Good
Active Image: Yes
Reboot Image: Yes
Screen 7-11. Display Firmware Image(s) screen
Field Descriptions
Board Type
FW Vintage
HW Signature
Suffix
Date
Timestamp
7-156 Issue 1 May 2002
Qualifier Description
The physical location of the
circuit pack (UUCSS).
Example:
get boot-image 1C07
DISPLAY FIRMWARE IMAGE(S)
Image 2
TN2501
02
02
A
03/02/01
12:42:18
Good
No
No
For VAL, this field is TN2501.
The firmware vintage number
The hardware signature number
The circuit pack suffix code letter
The date the firmware file was created or transferred to the circuit pack
The time that the firmware file was created or transferred to the circuit pack
Permissions Defaults
init
inads
craft
customer
555-233-143
Feature
Interactions