Netbios-Node-Type - Dell MXL 10GbE Reference Manual

Parameters
address
Defaults none
Command DHCP <POOL>
Modes
Command
Version 8.3.16.1
History

netbios-node-type

Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking Operating System (OS)
recommends specifying clients as hybrid.
Syntax
netbios-node-type type
Parameters
type
Defaults Hybrid
Command DHCP <POOL>
Modes
Command
Version 8.3.16.1
History
network
Specify the range of addresses in an address pool.
Syntax
network network /prefix-length
Parameters
network/
prefix-length
Defaults none
Dynamic Host Configuration Protocol (DHCP)
Enter the address of the NETBIOS name server. You may
enter up to eight, in order of preference.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the NETBIOS node type:
• Broadcast: Enter the keyword b-node.
• Hybrid: Enter the keyword h-node.
• Mixed: Enter the keyword m-node.
• Peer-to-peer: Enter the keyword p-node.
Introduced on the MXL 10/40GbE Switch IO Module.
Specify a range of addresses. Prefix-length range is from 17
to 31.
489