Host - Dell MXL 10GbE Reference Manual

host

For manual (rather than automatic) configurations, assign a host to a single-address pool.
Syntax
host address
Parameters
address/mask
Defaults none
Command DHCP <POOL>
Modes
Command
Version 8.3.16.1
History
lease
Specify a lease time for the addresses in a pool.
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
days
hours
minutes
infinite
Defaults 24 hours
Command DHCP <POOL>
Modes
Command
Version 8.3.16.1
History
netbios-name-server
Specify the NetBIOS windows internet naming service (WINS) name servers, in order of preference, that
are available to Microsoft dynamic host configuration protocol (DHCP) clients.
Syntax
netbios-name-server address [address2...address8]
488
Enter the host IP address and subnet mask.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the number of days of the lease. The range is from 0 to
31.
Enter the number of hours of the lease. The range is from 0
to 23.
Enter the number of minutes of the lease. The range is from
0 to 59.
Specify that the lease never expires.
Introduced on the MXL 10/40GbE Switch IO Module.
Dynamic Host Configuration Protocol (DHCP)