Excluded-Address - Dell MXL 10GbE Reference Manual

Command
Version 8.3.16.1
History

excluded-address

Prevent the server from leasing an address or range of addresses in the pool.
Syntax
excluded-address [address | low-address high-address]
Parameters
address
low-address
high-address
Defaults none
Command DHCP
Modes
Command
Version 8.3.16.1
History
hardware-address
For manual configurations, specify the client hardware address.
Syntax
hardware-address address
Parameters
address
Defaults none
Command DHCP <POOL>
Modes
Command
Version 8.3.16.1
History
Dynamic Host Configuration Protocol (DHCP)
Introduced on the MXL 10/40GbE Switch IO Module.
Enter a single address to be excluded from the pool.
Enter the lowest address in a range of addresses to be
excluded from the pool.
Enter the highest address in a range of addresses to be
excluded from the pool.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the hardware address of the client.
Introduced on the MXL 10/40GbE Switch IO Module.
487