Debug Ip Dhcp Clients Events - Dell MXL 10GbE Reference Manual

Defaults none
Command EXEC Privilege
Modes
Command
Version 8.3.16.1
History

debug ip dhcp clients events

Enable the display of log messages for the following events on DHCP client interfaces: IP address
acquisition, IP address release, Renewal of IP address and lease time, and Release of an IP address.
Syntax
debug ip dhcp client events [interface type slot/port]
Parameters
interface type
slot/ port
Defaults none
Command EXEC Privilege
Modes
Command
Version 8.3.16.1
History
debug ip dhcp clients packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
interface type
slot/ port
Dynamic Host Configuration Protocol (DHCP)
Introduced on the MXL 10/40GbE Switch IO Module.
Display log messages for DHCP events on the specified
interface.
• For a 10-GigabitEthernet Ethernet interface, enter
TenGigabitEthernet then the slot/port numbers; for
example, tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter
FortyGigabitEthernet then the slot/port numbers;
for example, fortygigabitethernet 0/2.
Introduced on the MXL 10/40GbE Switch IO Module.
Display log messages for DHCP packets sent and received on
the specified interface.
• For a 10-GigabitEthernet Ethernet interface, enter
TenGigabitEthernet then the slot/port numbers; for
example, tengigabitethernet 1/3.
• For a 40-GigabitEthernet Ethernet interface, enter
FortyGigabitEthernet then the slot/port numbers;
for example, fortygigabitethernet 0/2.
493