Show Ip Ospf Database Network - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS

SHOW IP OSPF DATABASE NETWORK

show ip ospf database network
Overview Use this command to display information about the network LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip ospf database network [<adv-router-id>]
[self-originate|<adv-router-id>]
Mode User Exec and Privileged Exec
awplus#
Examples
awplus#
awplus#
Output Figure 28-8: Example output from the show ip ospf database network
C613-50631-01 Rev A
Parameter
<adv-router-id>
self-originate
adv-router
show ip ospf database network 1.2.3.4 self-originate
show ip ospf database network self-originate
show ip ospf database network 1.2.3.4 adv-router 2.3.4.5
command

OSPF Router process 200 with ID (192.30.30.2)
Net Link States (Area 0.0.0.0)
LS age: 1387
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: network-LSA
Link State ID: 192.10.10.9 (address of Designated Router)
Advertising Router: 192.30.30.3
LS Seq Number: 80000001
Checksum: 0xe1b0
Length: 32
Network Mask: /24
Attached Router: 192.20.20.1
Attached Router: 192.30.30.3
OSPF Router process 200 with ID (192.30.30.2)
Net Link States (Area 0.0.0.0)
...
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The router ID of the advertising router, in IPv4 address format.
Note however, that this no longer represents a real address.
Displays self-originated link states.
Displays all the LSAs of the specified router.
"Getting Started
Guide.
1183