Chapter 4 Creating Classifier Groups And Policy Rules; Table 4: Policy Rule Commands And Precedence - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

NOTE: The ES2 10G Uplink LM and the ES2 10G LM support only IP, MPLS, and VLAN
interfaces.

Table 4: Policy Rule Commands and Precedence

Frame
ATM Relay
forward forward
color color
– –
mark-clp mark-de
(See mark-clp
in theJUNOSe
Command
Reference
Guide for
platform
support
information.)
filter filter
user-packet- user-packet-
class class
traffic-class traffic-class
– –
– –
– –
GRE IP
forward forward
color forward
interface
(input,
secondary
input, and
output
policies
only)
– exception
for input
and
secondary
input
policies only
(not
supported
on ES2 10G
Uplink LM)
mark forward
next-hop for
input
policies only
filter color
user-packet- rate-limit-
class profile
traffic-class user-packet-
class
– traffic-class
– mark
– filter
Chapter 4: Creating Classifier Groups and Policy Rules
IPv6 L2TP
forward forward
color color
– –
rate-limit- rate-limit-
profile profile
user-packet- filter
class
traffic-class user-packet-
class
mark traffic-class
filter –
– –
– –
MPLS VLAN
forward forward
color color
– –
rate-limit- mark-user-
profile priority
mark-exp filter
filter user-packet-
class
user-packet- traffic-class
class
traffic-class –
– –
– –
Policy Rule Precedence
33