Ike Local-Identity - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

ike local-identity

ike local-identity { ip address ipAddress | username userName | domain-name
Syntax
domainName }
no ike local-identity
Command introduced in JUNOSe Release 7.3.0.
Release Information
Sets the local IKE identity used for IKE security association (SA) negotiations. The no
Description
version removes the local IKE identity.
Options
IPSec Tunnel Profile Configuration
Mode
ipAddress IP address in 32-bit dotted decimal format (for example, 192.56.32.2)
userName—Username used as the IKE local identity for IKE SA negotiations
domainName Domain name used as the IKE local identity for IKE SA negotiations
(string of 1–32 characters)
Chapter 10: I Commands
685
ike local-identity