JunosE 11.2.x Command Reference Guide A to M
member-interface-type
Syntax
Release Information
Description
Options
Mode
Related Topics
1302
member-interface-type {vlan | atm-vc | ip}
no member-interface-type
Command introduced in JunosE Release 9.2.0.
Configures the member-interface type for a QoS interface set. The no version removes
the member-interface type from the parameter definition.
vlan—Specifies the member-interface-type as VLAN
atm–vc—Specifies the member-interface-type as VLAN
ip—Specifies the member-interface-type as VLAN
QoS Interface Set Configuration
Configuring Interface Sets for QoS
Copyright © 2010, Juniper Networks, Inc.