Xc Overhead; Dcn Physical Interface Page - Ip Address - Alcatel-Lucent 1850 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-47 XC Overhead
The Overhead Channel Cross Connection tab displays the following:
Click Create to create a new Overhead Cross-Connection Channel. See
Overhead" (p. 5-46).
DCN physical interface
This menu option contains the following sub-menus:
IP Address - Retrieves TCP/IP stack parameters.
•
LAN manag. - Allows to modify the various network interface parameters associated
•
with the customer LAN.
ARPCACHE mng - Allows the operator to get all the entries contained in the ARP
•
(Address Resolution Protocol) cache on the customer LAN interface.
IP address
This option is used to retrieve TCP/IP stack parameters. Select Xcom -> DCN Phys. If ->
IP Address option as shown in
Figure 3-48 DCN Physical Interface page - IP address
The NE Generic Configuration tab displays the IP Address Management panel that
contains the following parameters:
MAC ADDRESS (Medium Access Control address) - This is the MAC address
•
assigned to the card. Note that this parameter can only be read and cannot be modified.
............................................................................................................................................................................................................................................................
3 - 54
Figure 3-48.
Xcom menu
"Create XC
8DG08763KAAA
Issue 1 February 2009