Key (Radius Scheme View) - 3Com S7906E Command Reference Manual

View
Any view
Default Level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1
to 32 characters.
session-id session-id: Specifies a session by its ID. The ID is a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end time in the format of
hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a user by the user name, which is a case-sensitive string of 1 to 80
characters. The format of the user-name argument (for example, whether the domain name should be
included) must comply with that specified for usernames to be sent to the RADIUS server in the
RADIUS scheme.
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the display stop-accounting-buffer command to display information about the stop-accounting
requests buffered in the device by scheme, session ID, time range, user name, or slot.
Note that if receiving no response after sending a stop-accounting request to a RADIUS server, the
device buffers the request and retransmits it. You can use the retry stop-accounting command to set
the number of allowed transmission attempts.
Related commands:
user-name-format, retry stop-accounting.
Examples
# Display information about the buffered stop-accounting requests on the interface board in slot 1 from
0:0:0 to 23:59:59 on August 31, 2006.
<Sysname> display stop-accounting-buffer time-range 0:0:0-08/31/2006 23:59:59-08/31/2006
slot 1
Slot 1
Total 0 record(s) Matched

key (RADIUS scheme view)

Syntax
key { accounting | authentication } string
undo key { accounting | authentication }
View
RADIUS scheme view
reset stop-accounting-buffer,
2-7
stop-accounting-buffer enable,