Timer Quiet (Radius Scheme View); Timer Realtime-Accounting (Radius Scheme View) - 3Com S7906E Command Reference Manual

Since stop-accounting requests affect the charge to users, a NAS must make its best effort to send
every stop-accounting request to the RADIUS accounting servers. For each stop-accounting request
getting no response in the specified period of time, the NAS buffers and resends the packet until it
receives a response or the number of transmission retries reaches the configured limit. In the latter case,
the NAS discards the packet.
Related commands:
stop-accounting-buffer.
Examples
# In RADIUS scheme radius1, enable the device to buffer the stop-accounting requests getting no
responses.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable

timer quiet (RADIUS scheme view)

Syntax
timer quiet minutes
undo timer quiet
View
RADIUS scheme view
Default Level
2: System level
Parameters
minutes: Primary server quiet period, in minutes. It ranges from 1 to 255 and defaults to 5.
Description
Use the timer quiet command to set the quiet timer for the primary server, that is, the duration that the
status of the primary server stays blocked before resuming the active state.
Use the undo timer quiet command to restore the default.
Related commands: display radius scheme.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme test1
[Sysname-radius-test1] timer quiet 10

timer realtime-accounting (RADIUS scheme view)

Syntax
timer realtime-accounting minutes
reset stop-accounting-buffer,
2-23
radius scheme, display